Home / Products

What we cast

Ten product families, all made at the Sutala unit. Sizes below are our standard moulds — cut sizes, custom borders and special shades are made to order.

Zig-zag interlocking paver blocks laid in a field — Zig-zag blocks laid in a straight bond.

Zig-zag paver blocks

The most-used interlocking block in the district, and the one we cast most of. The wave on each edge locks into its neighbour in both directions, so wheels turning on the surface push the load sideways into the whole field instead of lifting one block.

Standard size	225 × 112.5 mm
Thickness	60 mm (paths, parking) · 80 mm (society roads) · 100 mm (heavy traffic)
Finish	Plain grey, coloured top layer, or full-body colour
Laid as	Straight bond, herringbone or basket weave

I-shape dumbbell paver blocks — I-shape blocks, alternating course.

I-shape & dumbbell blocks

Notched on all four sides, so each block is held by the four around it. This is what you want where vehicles stand still under load rather than drive across — the standing weight is spread instead of punching one block down.

Standard size	200 × 165 mm
Thickness	80 mm and 100 mm
Finish	Plain grey or coloured top layer
Laid as	Running bond with a kerb or edge restraint on all sides

Hexagonal paver blocks in two shades — Hexagon blocks in two shades.

Hexagon & cosmic blocks

Six-sided blocks that read as a pattern from a distance, which is why they are chosen for places people walk slowly — temple grounds, garden paths, hotel forecourts. Two or three shades mixed in the same field give the honeycomb effect.

Standard size	200 mm across flats · also 150 mm
Thickness	60 mm and 80 mm
Finish	Coloured top layer, two or three shades mixed
Laid as	Honeycomb field with half-blocks at the edges

Mixed-size cobble paving blocks — Mixed-size cobble, random bond.

Cobble & Milano blocks

Square and rectangular blocks in two or three sizes, laid in a random bond so no joint runs straight for long. Suits older houses, farmhouse approaches and anywhere a plain grid would look too new.

Standard sizes	100 × 100 mm · 200 × 100 mm · 200 × 200 mm
Thickness	60 mm and 80 mm
Finish	Plain, coloured, or antique-tumbled edge on request
Laid as	Random bond, mixed sizes from the same pallet

Rectangular paver blocks in running bond — Rectangular pavers, running bond.

Rectangular pavers & borders

The plain rectangle, used as a field on its own or as the border that frames a zig-zag or hexagon field. Also the block we cut for steps, edges and drain surrounds.

Standard size	200 × 100 mm
Thickness	60 mm and 80 mm
Finish	Plain grey, red, black or ochre top layer
Laid as	Running bond, herringbone, or as a two-course border

Galicha carpet tile with border bands and a centre motif — Galicha tile — bordered carpet pattern.

Galicha tiles

Carpet-pattern cement tiles cast with a border band and a centre motif, so a laid floor reads as one large rug rather than a grid of tiles. Made in our own moulds, which means the border and motif can be changed for your room size.

Standard sizes	400 × 400 mm · 600 × 600 mm · panel sets to order
Thickness	22–25 mm
Finish	Cast colour; polished on site after laying and curing
Made to order	Border width, motif and colour matched to the room

Chequered mosaic floor tiles with cast grooves — Chequered mosaic tiles with cast grip grooves.

Mosaic & chequered tiles

Plain mosaic tiles for indoor floors, and chequered tiles with cast grooves for ramps, steps and wet areas where a smooth floor would be a hazard.

Standard sizes	250 × 250 mm · 300 × 300 mm
Thickness	20–25 mm
Finish	Plain, chequered, or grooved anti-skid top
Colours	Grey, red, black, ochre, green and mixed chips

Split-face elevation cladding tiles on a wall — Split-face elevation cladding on a compound wall.

Elevation tiles

Textured cement cladding for the faces people actually look at — compound walls, gate pillars, plinths and house fronts. The split face throws a shadow line, so the wall keeps its character in flat afternoon light instead of going blank.

Standard sizes	300 × 600 mm · 300 × 300 mm · strip courses to order
Thickness	15–25 mm, varying with the face texture
Finish	Split face, rough stone, grooved, or smooth banded
Fixing	Cement mortar bed; sealer coat recommended after fixing

Cement jali

Perforated screen blocks that let air and light through a wall while keeping sun and rain out — staircase shafts, bathroom vents, boundary walls and temple screens. Cast in our own moulds, so the pattern can be matched across a whole elevation.

Standard sizes	300 × 300 mm · 450 × 450 mm · 600 × 600 mm
Thickness	40–60 mm
Patterns	Diamond, round, floral and geometric openings
Fixing	Built into the wall course or framed in an opening

Kerb stones separating a paved footpath from a road — Kerb stones, footpath paving and road edging.

Kerb stones & cement products

The rest of what a paving job needs, so you are not chasing four suppliers for one site. All cast in the same yard, from the same mix, at the same time as your blocks.

Kerb stones	Road kerbs, footpath edging and garden edging in standard sections
Drain covers	Slab covers for open drains and channels, to your span
Cement bricks	Solid and hollow blocks for boundary and partition walls
Also cast	Grass pavers, tree guards, benches and custom moulded items

Sizes and thicknesses listed here are our standard moulds. If your drawing calls for something else, send it across — most custom shapes are a mould change, not a different factory.

Tell us the area and the shape

Give us the square footage, the block you want and where the site is. We will work out quantity, wastage and a delivered rate.

Call 94221 80172 Send an enquiry